Spotify on Debian GNU/Linux in Canada

Today I decided to try out the free ad-sponsored Spotify music streaming service. It has been available in Canada since September 2014.

After signing up you can immediately use the flash-based web player at play.spotify.com.

Installing the client app

Alternatively you can download and install the Spotify client app. I cannot say yet what the advantages or disadvantages are, maybe reading this article can be helpful.

Anyway, if you want to try the client app, for Debian (or Ubuntu) users it works like this:

Add the repo key (to verify downloaded packages)
Add the spotify repo to apt sources
Update apt caches
Install the spotify client

Here are the shell commands (requires sudo):

sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys BBEBDCB318AD50EC6865090613B00F1FD2C19886
echo deb http://repository.spotify.com stable non-free | sudo tee /etc/apt/sources.list.d/spotify.list
sudo apt-get update
sudo apt-get install spotify-client

After successful installation you will find a “Spotify” entry in the “Multimedia” section of your start menu.

Using your Facebook login

If you use your Facebook account to sign into Spotify you will probably see this question:

Spotify would like to post to Facebook for you.
Who do you want to share these posts with?

It is safe to choose “Not Now” which prevents Spotify from posting to your timeline. The login will still work.

If your are using the downloaded stand-alone client app and the Facebook login fails with an error page, then simply enter the email address and password from your Facebook account into the login fields of the Spotify client app.

Spotify says that it only uses these credentials to pass through to the Facebook authentication and won’t store your password anywhere. I hope that’s true.

Set the X cursor theme in XFCE 4.10

After upgrading to Debian Jessie and XFCE 4.10, I set the default cursor theme in XFCE main menu – Settings – Mouse and Touchpad – Theme tab.

But this seemed to affect only a few applications.

To consistently set the theme for all applications and the desktop I had to run this:

oliver@debian:~$ sudo update-alternatives --config x-cursor-theme
There are 3 choices for the alternative x-cursor-theme (providing /usr/share/icons/default/index.theme).

  Selection    Path                                    Priority   Status
------------------------------------------------------------
  0            /usr/share/icons/Adwaita/cursor.theme     90        auto mode
  1            /usr/share/icons/Adwaita/cursor.theme     90        manual mode
  2            /usr/share/icons/DMZ-Black/cursor.theme   30        manual mode
* 3            /usr/share/icons/DMZ-White/cursor.theme   50        manual mode

Press enter to keep the current choice[*], or type selection number:

Select the desired theme from the listed options and make sure it is the same as the one you selected in the XFCE settings.

Zulu – Certified OpenJDK 8 builds for all operating systems

You might have heard that Java is Open Source. And then you noticed that the Java SE downloads from the Oracle website are not actually Open Source. Maybe you also heard about OpenJDK.

So how does this fit together?

OpenJDK is an Open Source implementation of Java and Oracle Java engineers do work on Java with the OpenJDK community and and within the OpenJDK projects.

But source code needs to be compiled into executable binaries to be useful for end users. And that’s where things get dicey …

Where to find OpenJDK builds

For a long time there has been no reliable source for certified, well-supported builds of OpenJDK for all platforms.

The various GNU/Linux distributions, like Fedora, Debian, etc, have provided OpenJDK builds for a quite a while now, but for Windows and MacOS there were only some unofficial, often outdated hobby projects without reliable security updates.

Zulu – Open JDK builds

This changed within the last 2 years: JVM vendor Azul Systems first released their “Zulu” line of free OpenJDK builds in September 2013, mainly targeting Windows Servers and the Microsoft Azure cloud. In 2014 they added support for Linux, MacOS and Java 8, as well as Docker images. All Zulu builds are certified against the official Java SE TCK. The focus is on the JDK and servers, without browser plugin or webstart.

The Azul website does not clearly state their security update policy for their free builds, but they offer deb and rpm package repositories that seem to contain latest builds of OpenJDK that match the current Oracle JDK update versions. Also, their engineers participate in the community and allegedly contribute back to OpenJDK.

Zulu – OpenJDK 8 for Debian stable

For Debian stable (Wheezy or Jessie), Azul is a convenient way to install OpenJDK 8, since the Debian openjdk-8 package is currently only available in Debian unstable and hasn’t even made it into the Debian testing yet.

Here is how I set up the Azul deb repo and installed their OpenJDK 8:

sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 0x219BD9C9
apt_source='deb http://repos.azulsystems.com/debian stable main'
apt_list='/etc/apt/sources.list.d/zulu.list'
echo "$apt_source" | sudo tee "$apt_list" > /dev/null
sudo apt-get update
sudo apt-get install zulu-8

Please note, that the package installation automatically sets the Java related system alternatives to the Zulu ones. So right after zulu-8 installation the java version in your system path will be something like this:

oliver@basement:~$ java -version
openjdk version "1.8.0_45"
OpenJDK Runtime Environment (Zulu 8.7.0.5-linux64) (build 1.8.0_45-b14)
OpenJDK 64-Bit Server VM (Zulu 8.7.0.5-linux64) (build 25.45-b02, mixed mode)

How to use Oracle Java 8 plugin in Iceweasel on Debian wheezy

Download the JRE from Oracle website.

Then perform the following steps (adjust the tar.gz filename according to what you downloaded, and replace “jre1.8.0_40” with the directory of your extracted tar.gz):

cd /opt
sudo tar xvzf ~/Downloads/jre-8u40-linux-x64.tar.gz
sudo chown -R root.root jre1.8.0_40
sudo ln -s jre1.8.0_40 jre
sudo update-alternatives --install /usr/lib/mozilla/plugins/libjavaplugin.so mozilla-javaplugin.so /opt/jre/lib/amd64/libnpjp2.so 1000
sudo update-alternatives --set mozilla-javaplugin.so /opt/jre/lib/amd64/libnpjp2.so

Using sipgate.de on Linux with Linphone SIP client

Note: This is a follow-up blog entry to yesterday’s post about using the Zoiper SIP client on Linux. Linphone works comparably well so far and if I won’t come across any issues, I will recommend Linphone, since it is fully Open Source, which future-proofs is existence and allows others to contribute and improve the software better than for a closed-source product like Zoiper.

Linphone is a GPL licensed SIP client (“softphone”). It has been around since 2001 and is actively developed by the French company Belledonne Communications.

As the name suggests, the software was first developed for Linux but has gradually become truly cross-platform, now supporting Windows, MacOS, Linux, Android, iOS, Windows Phone 8 and most recently a web edition. For most operating systems, simply visit linphone.org and follow the download and installation steps indicated there.

Users of GNU/Linux distributions like Debian, Ubuntu, etc, install the distribution package through their favorite package manager. On my Debian stable (“wheezy”) I did this today:

sudo apt-get install linphone

Then I started up Linphone from the XFCE Start menu, where it is listed in the “Internet” submenu. I canceled the account setup wizard because it didn’t seem to work for me, disabled Video in the Options menu because I am not planning to use it yet, then selected Options – Preferences – Manage SIP accounts and configured my sipgate.de account like this:

Your SIP identity:	sip:~~3998984~~@sipgate.de
SIP Proxy address:	sip:sipgate.de

Screenshot

Note that “~~3998984~~” is my sipgate.de SIP account name, so you have to substitute it with yours, but note that it is usually not the same as your sipgate.de web login username.

After this initial setup, I successfully tested the account and my headset by calling the sipgate.de test number 10005, which works very similarly to the Skype test call feature.

For personalized config information you can log in at sipgate.de and consult the “Konfigurationshilfe“, selecting one of the Linphone entries from the softphone device lists. I have a sipgate.de basic account, so if you are on a different plan, details may vary slightly.

If this blog post was helpful and/or if something seems inaccurate, please leave a comment. Happy telephoning …

Using sipgate.de on Linux with Zoiper SIP client

I use sipgate.de for international phone calls, using a Grandstream HandyTone IP-to-analog adapter installed in our house, but also using a SIP-capable “softphone” application.

Update: Open Source SIP client software like Linphone, SFLphone, Ekiga or others are preferrable to the below mentioned closed source applications. I successfully use Linphone now, which is also the only Open Source softphone that is explicitly listed by sipgate on their supported devices page.

Below is the original post about Zoiper, which might be of interest if you for some reason don’t like Linphone.

On Windows I have successfully used the PhonerLite freeware (binary download at no charge, proprietary licensed closed-source), which is not available for Linux.

But today I found out, that Sipgate also recommends a SIP client called Zoiper, which is available for Linux. It is also closed-source freeware. But at least – unlike Skype – the installer package has support for 32bit and 64bit Linux systems and the company behind Zoiper seems to develop for all target platforms equally (Android, iOS, Windows Phone 8, Windows, Linux, Mac, Web Browsers).

The Zoiper website has detailed step-by-step installation instructions. To summarize, the installation works like this, assuming the downloaded file is Zoiper_3.3_Linux_Free_32Bit_64Bit.tar.gz :

tar xvzf Zoiper_3.3_Linux_Free_32Bit_64Bit.tar.gz
sudo ./Zoiper_3.3_Linux_Free_64Bit.run

I specified /opt/zoiper as the installation directory.

Then I added an account like this (my SIP account username is 3998984, this is not the sipgate.de web login user name):

The audio devices (speaker, mic) can be configured and tested using the “Audio wizard”:

Human readable timestamp for filenames

I use this bash alias (should work in Linux, Cygwin, probably MacOS, maybe other Unixes):

alias timestamp="date --rfc-3339=ns | tr ' '  '_'"

Then use it like this for example to archive a file:

mv somefile somefile_$(timestamp)

You should see something like

`somefile' -> `somefile_2014-11-13_11:45:46.980175800-04:00'

If you don’t like colons in file names, change tr ' ' to tr ' :'.

Get java version string via shell commands

Determine the pure java version string from any Unix/Linux shell (including Cygwin):

java -version 2>&1 | head -n 1 | cut -d'"' -f2

This requires only the very commonly available and lightweight “head” and “cut” commands.

I originally found the one-liner on stackoverflow. Thanks to the friendly folks who shared it.

To get only the major version part (e.g. 8 for Java 1.8.x, 11 for 11.x), use this:

java -version 2>&1 \
  | head -1 \
  | cut -d'"' -f2 \
  | sed 's/^1\.//' \
  | cut -d'.' -f1

Note: The sed step is required for versions up to Java 8 that start with the “1.” prefix.

Example: Ensure Java 11 or higher:

#!/bin/bash

version=$(java -version 2>&1 \
  | head -1 \
  | cut -d'"' -f2 \
  | sed 's/^1\.//' \
  | cut -d'.' -f1 
)

if [ $version -lt "11" ]; then
  echo "Java 11 or higher is required."
  exit 1
fi

Use xtrlock via XFCE 4.8 lock button

I currently use XFCE 4.8 on Debian Wheezy as my desktop system. Its panel supports so-called “action buttons” for hibernate, lock, shutdown, etc.

I use one of those buttons to lock the screen but I don’t like xscreensaver (too ugly, don’t need the screensaver stuff), gnome-screensaver (too many dependencies), xlock and its successor xlockmore (too ugly) or slock (just a black blank screen always confuses me).

Good thing is that I found xtrlock which does what I want: It just shows a lock symbol instead of the mouse cursor, all screen content is still visible but user interaction is blocked until the current user password has been typed in.

This is just enough to prevent my 2 and 5 year old children from messing around with my laptop. So I installed it:

sudo apt-get install xtrlock

Problem was that the XFCE lock button calls xflock4 which is a simple shell script that has hardcoded support for the afore-mentioned set of lock programs, but not for xtrlock.

My simple solution was to take advantage of /usr/local/bin being usually before /usr/bin in the PATH and create a script /usr/local/bin/xflock4 with this content:

#!/bin/sh
xtrlock

Make it executable with

sudo chmod a+x /usr/local/bin/xflock4

Now I can use the XFCE lock button and get what I want.

Alternatively, there are a couple of other light-weight lock programs for Linux:

Minimal Debian Wheezy netinstall – no network after reboot

I just installed Debian Wheezy on a Toshiba laptop using the netinstall CD.

During installation everything worked fine, ethernet and wireless interfaces were both detected and functional. I actually did the installation using the wireless connection. On the “Task selection” screen I only selected “Laptop” and “Standard system utilities”.

However, after the reboot at the end of the installation, I had no network anymore. Here is what I did to fix it:

Edit /etc/network/interfaces and add this block:

auto eth0
allow-hotplug eth0
iface eth0 inet dhcp

Then run as root:

/etc/init.d/networking start

If the machine is connected via ethernet cable to a router, you should see messages about your network being configured via DHCP, i.e. receiving its local IP address.

If you get error messages, then you might have to install firmware for your network card:

On another computer, download firmware.tar.gz and save it to a USB stick.

Then do the following as root on the new Debian system:

Plug in the USB stick and mount it. You might have to run “dmesg” to see which device file to mount. In my case it was /dev/sdb …

mount /dev/sdb /mnt

Unzip the firmware tarball:

cd /mnt
tar xvzf firmware.tar.gz

Install the core firmware packages:

dpkg -i firmware-linux-*.deb

Install additional firmware packages as necessary. Use the output of the lspci command to identify your network cards. Consult the “Firmware” Debian wiki page to find out what package you have to install.

If you are done installing firmware, restart the system:

shutdown -r now

Hopefully you will have a network connection after the reboot.